LFE SERIES AUXILIARY SWITCH
Rated voltage: DC220V AC220V

Rated current: 20A

Conventional heating current: 25A

Breaking capacity: DC 220V/3A, T0.95:6P =300ms,AC220V/10A

Applicable temperature range: -25℃~+80℃

Power frequency withstand voltage: 2000V(50Hz) /1min

Mechanical life: 20000 times

Hotline: +86-024-82666888/+86-15710569019
Product profile

LFE series auxiliary switch is one of the auxiliary components of high voltage equipment, which is suitable for controlling the closing, opening, interlocking and signal loop of various high voltage switch operating mechanisms, and can also be used as a conversion or combination switch. Its large-capacity on-off capability effectively overcomes the defects of other auxiliary switches with limited capacity and low contact life, and significantly prolongs the service life of the product, making it an effective substitute for other similar auxiliary switches.

Applicable industry

1. Ambient temperature: -25℃~+80℃;

2. Altitude: no more than 5000 meters;

3. Humidity: the average relative humidity within 24h does not exceed 95%; The average steam pressure does not exceed 2.2KPa; The monthly average relative humidity does not exceed 90%; The average steam pressure does not exceed 1.8KPa;

4. Vibration acceleration is not more than 15m/s²;

5. The surrounding air is not significantly polluted by dust, smoke, corrosive and combustible gases.

Technical parameter

Rated current

20A

Conventional heating current

25A

Rated voltage

Direct current DC

communication  AC

110V

220V

220V

Breaking capacity (>1°/ms

T0.95 6P=300ms

Cosφ=0.4

6A

3A

10A

Power frequency withstand voltage

2000V(50Hz) /1min

Mechanical life

20000

Switch profile

n= number of substrates; L, L1, L2= Customer requirements.