S100 series micro switch is a limit switch with self-elastic flipping ability, the action speed is determined by the elasticity of the contact itself, does not depend on the external drive speed to determine the opening and closing speed, so it is very practical for slow drive device limit and mechanical status detection and other occasions;
The S100 series microswitches are equipped with a mechanical forced disconnect operation. Even in the case of short circuit, the contact welding can still be forced to disconnect by external operating force, for this reason, the microswitch can establish a safe circuit;
The S100 series microswitch has a self-cleaning contact protection device to effectively protect the environment from dust, moisture and pollutants, so that the microswitch has a high reliability and sensitivity, even in a very low contact load, reliability is still very high. Very suitable for automation control, chain and other low voltage and current signals; S100 series micro switch internal fixed contact plate are all copper plated sterling silver, the moving contact plate is a strong elastic phospho-copper contact point inlaid with silver alloy contact, with small volume, reliable control, strong flow ability.
1, the ambient air temperature: -40℃~+70℃;
2, altitude: not more than 5000 meters;
3, humidity: within 24h, the average relative humidity does not exceed 95%; The average steam pressure does not exceed 2.2kPa; The monthly average relative humidity does not exceed 90%; The average steam pressure does not exceed 1.8kPa;
4, vibration acceleration is not more than 15m/s²;
5, the surrounding air is not significantly polluted by dust, smoke, corrosive and flammable gases.
Rated current |
2A |
|
Rated voltage |
Direct current DC |
communication AC |
24V |
220V 220V |
|
Breaking capacity |
T=20ms |
Cosφ=0.4 |
2A |
1.5A |
|
Power frequency withstand voltage |
2500V(50Hz) /1min |
|
Class of protection |
IP40 |
|
Maximum operating force |
2.25N max |
|
Mechanical life |
1000000 |